Measuring the technical efficiency of machinery used in the olive oil industry in Libya and its relationship to the growth and development of the food industry’s contribution to the GDP during the period 2003–2020.

Authors

  • Tarek Omar Attia Department of Agricultural Business and Project Management – Higher Institute for Agricultural Technology, Al-Ghiran Author
  • Mustafa Faraj Al-Maghrabi Department of Economics, Faculty of Economics, University of Zawia Author

DOI:

https://doi.org/10.65405/sjh.2.3.270

Keywords:

the value of output from food industries in Libya, the value of machinery used in the olive oil industry and its parts in Libya, production flexibility, marginal and average output, and capacity return

Abstract

The aim of the research is to study and measure the technical efficiency of the machines used in the olive oil industry in Libya and the development of their contribution to the national economy during the period 2003-2020. The study assumes that there is a direct relationship between the value of machines and their parts (spare parts), and that the capacity return is decreasing. The importance of the study lies in the fact that measuring continuous and periodic technical efficiency helps to detect imbalances quickly and at their inception, and leads to quickly addressing deviations, reducing losses and directing work towards the right track. Where the value of investments of machines and their parts amounted to about 227105246.18 Dinars were distributed on the machines and their parts as follows. 18 26420214 and 200,685,032 dinars, respectively, during the study period. Despite this, the domestic product of food industries is still very weak and did not exceed a total of 21.5 million dinars during the study. The results showed that there is a strong direct relationship between the independent variables and the dependent variable amounting to 79%, and that every million dinars invested in machinery brings losses of -1.85 million dinars. While the parts of the machines achieve losses for dinars from every million dinars that are invested in the maintenance of these machines. While the value of the constant in the production function indicates that, the coefficient of technology used in the production process is negative. The production function indicated that each of the new machines and their parts do not enjoy technical efficiency because no production is achieved with them because they are located in the unrealized production area (the third stage of production).

References

أولا الكتب:

1- عامر المقري، مراد زكي، 2000، اقتصاديات الإنتاج الزراعي، الطبعة الاولي، منشورات جامعة الفاتح، طرابلس، ليبيا.

تانيا: الدراسات والأبحاث:

A-المراجع باللغة العربية.

1- الرويس والبقمي ،2003، " قياس معدل الأداء والكفاءة التقنية لمصانع انتاج الحليب في المملكة العربية السعودية"، مجلة الإسكندرية للتبادل العلمي، كلية الزراعة، جامعة الإسكندرية، العدد الثاني، مصر.

2- عبد الله بن عبد العزيز، 2006، تقويم الكفاءة التقنية والاقتصادية لصناعة تعبئة التمور في منطقة الرياض بالمملكة العربية السعودية، رسالة دكتوراه، قسم الاقتصاد الزراعي، كلية الزراعة، جامعة الخرطوم، السودان.

3- قريشي الجموعي ،2006، قياس الكفاءة الاقتصادية في المؤسسات المصرفية دراسة نظرية وميدانية للبنوك الجزائرية خلال الفترة 1994-2003، رسالة دكتوراه، قسم نقود ومالية، كلية العلوم الاقتصادية وعلوم التسيير، جامعة الجزائر، الجزائر.

4- مهدي عثمان، 2007، تحليل وتقييم واقع الصناعات الغذائية في مدينة نابلس، رسالة ماجستير، قسم التخطيط الحضري والإقليمي، كلية الدراسات العليا، جامعة النجاح الوطنية، نابلس، فلسطين.

5- مصطفي المغربي، 2010، الصناعات الغذائية ودورها في تنمية الاقتصاد الوطني في ليبيا، رسالة ماجستير، قسم الاقتصاد الزراعي، كلية الزراعة، جامعة طرابلس، ليبيا.

6- مصطفي المغربي، 2023، دراسة اقتصادية لقياس كفاءة الآلات وعلاقتها بنمو وتطور الناتج المحلي للصناعات الغذائية في ليبيا خلال الفترة 2006 – 2018 م، المؤتمر الرابع للاقتصاد الزراعي في ليبيا، كلية الزراعة، جامعة بنغازي، بنغازي، ليبيا

7- عبد الوهاب عبدات،2011، واقع الصناعات الغذائية وآفاق تطورها في الجزائر خلال الفترة 1997-2007، رسالة دكتوراه، قسم العلوم الاقتصادية فرع التخطيط، كلية العلوم الاقتصادية والعلوم التجارية وعلوم التسيير، جامعة الجزائر، الجزائر.

8- محمد وليد، نهيل الحيط، 2016، " تقييم الأداء الاقتصادي لمنشآت صناعة الادوية المدرجة في بورصة عمان"، المجلة الأردنية للعلوم الاقتصادية، المجلد 3، العدد 2، الاردن.

B-المراجع باللغة الإنكليزية:

1-Femier ,G D, and porter ,PK , The productive Efficiency of U.S.Milk processing Co-operatives ,Journal of Agricultursl Economics , 1991,42 (2) :161-179 .

2-Coelli T.J, Aguide to Frontier version 4.1: A Computer Program for Frontier Production Function Estimation, (CEP) working paper 96|07, Department of Econometrics University of New England, Armidale, AUSTRALIA.1996.

3-Battese G.E. and Hassan S., Technical Efficincy of Cotton Farmersin vehari district of Punjab Pakistan,(CEPA) working paper 98|08, Department of Econnometrics, University of New England, Armidale, Australia, 1998.

4-Ruhul A (2006) . Measuring Productive Efficiency in Corporating Firms Hetrogeneity: An Empirical Analysis, Journal of Economic Development, 31 (1): 135-147.

5-Kolawole Ogundari (2008), Farm Level Efficiency and Resource Use: Application of Stochastic Frontier Analysis to Aquaculture Farms in Southwest Nigeria, Georg-August University, Germany.

Downloads

Published

2026-11-12